Icon Contact
Contact us

Leaders in Zero Liquid Discharge.

Logo Linkedin

Case Studies

VACUDEST XS 300 Clearcat

Branch: Industrial manufacturing

Type of sewage: Rinsing water from pickling, passivation and electropolishing

Our clients requirements for a modern wastewater treatment system were, above all, a fully automated system and a reduction in process costs. The solution: a fully automated VACUDEST CS 300 with Clearcat

Vacudest M1.500 Clearcat at company Umdasch

Branch: Industrial manufacturing

Type of sewage: Waste water from component cleaning

Highest distillate quality with low conductivity for recirculating the rinsing water - these were the requirements. They were achieved with a VACUDEST 1.500 with Clearcat.

A Clearcat vacuum distillation plant at Sika France in Gournay-en-Bray for on-site treatment of industrial wastewater.

Branch: Construction industry

Type of sewage: Waste water from manufacturing process

When looking for a replacement for their aging wastewater treatment plant, it was important to SIKA that the distillate can be reused and that all limit values for discharge into the municipal wastewater treatment plant will be met. The solution - a VACUDEST 4.500 with Clearcat.

In the new building of the REKU Color company, a wastewater treatment system had to be installed that is both reliable and sustainable. The company therefore has chosen a VACUDEST vacuum distillation system.

Branch: Industrial manufacturing

Type of sewage: Surface technology

REKU Color saves a lot of CO2, transport and packaging costs with their most modern, fully automatic powder coating plant in Tyrol  this of course also includes the  circulation of rinsing water through a wastewater treatment system from H2O.

Branch: -

Type of sewage: -

Innovative vacuum distillation technology from H2O reliably ensures compliance with strict limits for disposal of water into watercourses.

Branch: Engines and gearboxes

Type of sewage: Waste water from aluminium die casting

Innovative and space-saving evaporator technologies from H2O GmbH can achieve a high treatment quality for wastewater contaminated with mould release agents and cooling lubricants.

Branch: Pharmaceutical industry

Type of sewage: Surface technology

Less maintenance, better quality, more automation - that's what RDO Springs wanted to achieve with their new wastewater treatment. The decision was made in favour of an energy-saving VACUDEST system: "Now we can finally make better use of our resources!

Branch: Automobile

Type of sewage: Wastewater from degreasing, pickling and phosphatizing

While relocating its production line, a manufacturer of high-end sealing systems for powertrains in China considered a new wastewater concept. For the company, which specializes in precision seals and modules made of elastomer, metal, and plastic materials for the automotive industry, environmentally compatible processes and the efficient use of water as a resource are important aspects.

Branch: Aviation industry

Type of sewage: Surface technology

At Rabas Protec in Saint Nazaire, France, aluminium parts are produced, mainly for the aerospace industry. After mechanical processing, the parts are anodised and painted to protect them from corrosion. To do this, the surfaces of the parts are first prepared in degreasing baths, followed by sodium and acid pickling. Before the surface treatment, an NDT test can be carried out using dye penetrant testing. The final step is painting.

The company H. u. E. Büschel GmbH now relies twice on recirculation and thus saves enormous disposal costs every year.

Branch: -

Type of sewage: -

The demands placed on components in the automotive industry are becoming more and more stringent - as a result, the requirements placed on manufacturers and suppliers in terms of cleanliness are also increasing.

The VACUDEST XS enables IWIS in Landsberg to recycle the wash water for their parts cleaning.

Branch: -

Type of sewage: -

In the course of the expansion of production at IWIS in Landsberg and the acquisition of new parts washing systems, project manager Henning Fritz and the person responsible for the parts washing systems also considered a new wastewater treatment system. Due to the good experiences with the company H2O GmbH at the location in Munich and a very successful, quality-improving test run in their own production, the decision to use a sustainable VACUDEST vacuum distillation system for this site as well was made.

Branch: -

Type of sewage: -

In November 2013, AUDI AG opened its new production facilities in Münchsmünster. In the Industrial Park in Münchsmünster, located approximately 30 kilometres to the east of the main plant, an Audi competence centre was created for the production of bodywork structural parts made of die-cast aluminium, hot and cold formed pressed parts, as well as chassis components.

Branch: -

Type of sewage: -

Sustainable and economical production - this was also the wish of the company ZINKPOWER Coating Schopsdorf in Saxony-Anhalt. The company specialises in the powder coating of steel, hot-dip galvanised steel and aluminium components. The company opted for a VACUDEST vacuum distillation system for the water treatment process.

Branch: -

Type of sewage: -

As a family-owned company with a long tradition spanning more than seven decades, ecological responsibility is a fundamental component of the Harting Technology Group's actions. Thus, the course towards wastewater-free production with the VACUDEST process was set early on at the main plant in Espelkamp. This fundamental decision in favour of ecologically sensible action in combination with economic considerations was also already supported during the company's development in China.

Branch: Automobile

Type of sewage: Waste water from die casting process

Sea Link International, a Tier 2 manufacturer that specializes in the development of complex components for the automotive lighting industry opened in October 2016 its new die cast facility in Kunshan. Looking for a sustainable and economical solution for its wastewater Sea Link opted for an H2O vacuum distillation system. Operation Manager Elmir Beca was involved in this project from the beginning and its major booster. He talks about his experience in this interview.

Branch: Automobile

Type of sewage: Waste water from component cleaning

Satisfaction and a little pride - this is reflected in the faces of the VACUDEST operators of the automotive supplier HQM Induserv from Saxony.

Branch: Watch industry

Type of sewage: Wastewater from metal processing

Since 1951, it has been a passion for high-quality SWISS MADE products that has turned CAPSA into a constantly evolving company that has successfully applied its unrivalled know-how to the service of the watchmaking industry. With 200 employees, a plant with over 400 machines including automatic lathes, a CNC machining centre, rework and assembly machines, CAPSA offers its clients a wide range of products and a great potential for production. CAPSA’s modern, efficient quality management system guarantees full implementation of the instructions provided by its clientele.

Branch: Construction industry

Type of sewage: Waste water from manufacturing process

The SIKA France factory in Gournay-en-Bray, subsidiary of the Swiss group SIKA AG, mainly manufactures additives for concrete and sealing products. These products are used in the building sector. Their production generates liquid waste which, after treatment, can still exceed the authorised limits for waste in municipal plants. The main value involved was the COD (chemical oxygen demand).

Branch: Pharmaceutical industry

Type of sewage: Stainless steel pickling water

20 years of H2O – two decades worth of experience. Many years of experience, including from the customers who use our systems. How did things used to be? What has happened since? To find that out, we visited one of our oldest clients. Believe it or not, they have been running a VACUDEST system to treat their stainless steel pickling water for 28 years. 

Branch: -

Type of sewage: -

The Vendée Concept plant in La Roche-sur-Yon (85) manufactures systems for the food industry using specific technological processes. When manufacturing their machines from welded stainless steel, water is generated as a by-product: namely rinsing water from the pickling and passivation processes. Previously this wastewater has been treated on site using a physicochemical facility. Vendée Concept has now decided to use a sustainable vacuum evaporator from H2O.

Branch: Industrial manufacturing

Type of sewage: Waste water from component cleaning

Kompressorenbau Bannewitz GmbH (KBB) has decided that it will no longer have wastewater from its various processes collected by a waste management company. Instead, the Saxon company has opted to deploy a VACUDEST vacuum distillation system from H2O GmbH. The resulting annual savings amount to €40,000.

Branch: Industrial manufacturing

Type of sewage: Stainless steel pickling water and rinsing water from pretreatment

The more profitable a project, the greater the investment. But it’s not just high savings potentials which motivate businesses to invest in wastewater treatment. The responsibility to protect the environment is also playing a key role for an increasing number of industrial companies.

Branch: Automobile

Type of sewage: Wastewater from degreasing, pickling and phosphatizing

Brock Alloy Wheels GmbH is one of the leading manufacturers of alloy wheels and aluminium rims. The company opened a new subsidiary, Jajce Alloy Wheels, in Bosnia-Herzegovina at the start of 2017.

Branch: Industrial manufacturing

Type of sewage: Rinsing water from pickling, passivation and electropolishing

“If it works, work with it; if it doesn’t, change it!” This was the motto under which the French firm DBP Holding operated when it decided on a proven wastewater treatment system with VACUDEST technology for its new factory workshop. Following over 15 years of positive experience with two existing VACUDEST system installations, a new VACUDEST L 4500 is now processing acidic rinsing water used to condition stainless steel and titanium.

Branch: Writing instruments

Type of sewage: Waste water from electroplating

Montblanc is a company based in Hamburg, Germany, that is well-known for manufacturing handcrafted, high-quality writing instruments. All Montblanc writing instruments are characterised by their high-quality materials. Many individual components in the pens – such as the nibs, rings and clips – are made from precious metals or are coated with precious metals. An electroplating process is used to coat the components with these metals. This process results in wastewater that contains precious metals and that must be treated before it can be fed into the sewerage system.

Branch: Aviation

Type of sewage: Waste water from crack testing

Jet Aviation in Basel, Switzerland, is using a VACUDEST vacuum distillation system to efficiently and sustainably treat wastewater left over from refurbishing aircraft parts. This state-of-the-art system replaced outdated chemical/physical treatment at the company...

Branch: -

Type of sewage: Waste water from electroplating

Evaporation by VACUDEST vacuum distillation plants is a cost effective, proven alternative to
chemical-physical treatment of wastewater from rotogravure cylinder production processes, allowing zero discharge production facilities.

VACUDEST XS 300 Clearcat

Branch: Industrial manufacturing

Type of sewage: Rinsing water from pickling, passivation and electropolishing

Our clients requirements for a modern wastewater treatment system were, above all, a fully automated system and a reduction in process costs. The solution: a fully automated VACUDEST CS 300 with Clearcat

Vacudest M1.500 Clearcat at company Umdasch

Branch: Industrial manufacturing

Type of sewage: Waste water from component cleaning

Highest distillate quality with low conductivity for recirculating the rinsing water - these were the requirements. They were achieved with a VACUDEST 1.500 with Clearcat.

A Clearcat vacuum distillation plant at Sika France in Gournay-en-Bray for on-site treatment of industrial wastewater.

Branch: Construction industry

Type of sewage: Waste water from manufacturing process

When looking for a replacement for their aging wastewater treatment plant, it was important to SIKA that the distillate can be reused and that all limit values for discharge into the municipal wastewater treatment plant will be met. The solution - a VACUDEST 4.500 with Clearcat.

In the new building of the REKU Color company, a wastewater treatment system had to be installed that is both reliable and sustainable. The company therefore has chosen a VACUDEST vacuum distillation system.

Branch: Industrial manufacturing

Type of sewage: Surface technology

REKU Color saves a lot of CO2, transport and packaging costs with their most modern, fully automatic powder coating plant in Tyrol  this of course also includes the  circulation of rinsing water through a wastewater treatment system from H2O.

Branch: -

Type of sewage: -

Innovative vacuum distillation technology from H2O reliably ensures compliance with strict limits for disposal of water into watercourses.

Branch: Engines and gearboxes

Type of sewage: Waste water from aluminium die casting

Innovative and space-saving evaporator technologies from H2O GmbH can achieve a high treatment quality for wastewater contaminated with mould release agents and cooling lubricants.

Branch: Pharmaceutical industry

Type of sewage: Surface technology

Less maintenance, better quality, more automation - that's what RDO Springs wanted to achieve with their new wastewater treatment. The decision was made in favour of an energy-saving VACUDEST system: "Now we can finally make better use of our resources!

Branch: Automobile

Type of sewage: Wastewater from degreasing, pickling and phosphatizing

While relocating its production line, a manufacturer of high-end sealing systems for powertrains in China considered a new wastewater concept. For the company, which specializes in precision seals and modules made of elastomer, metal, and plastic materials for the automotive industry, environmentally compatible processes and the efficient use of water as a resource are important aspects.

Branch: Aviation industry

Type of sewage: Surface technology

At Rabas Protec in Saint Nazaire, France, aluminium parts are produced, mainly for the aerospace industry. After mechanical processing, the parts are anodised and painted to protect them from corrosion. To do this, the surfaces of the parts are first prepared in degreasing baths, followed by sodium and acid pickling. Before the surface treatment, an NDT test can be carried out using dye penetrant testing. The final step is painting.

The company H. u. E. Büschel GmbH now relies twice on recirculation and thus saves enormous disposal costs every year.

Branch: -

Type of sewage: -

The demands placed on components in the automotive industry are becoming more and more stringent - as a result, the requirements placed on manufacturers and suppliers in terms of cleanliness are also increasing.

The VACUDEST XS enables IWIS in Landsberg to recycle the wash water for their parts cleaning.

Branch: -

Type of sewage: -

In the course of the expansion of production at IWIS in Landsberg and the acquisition of new parts washing systems, project manager Henning Fritz and the person responsible for the parts washing systems also considered a new wastewater treatment system. Due to the good experiences with the company H2O GmbH at the location in Munich and a very successful, quality-improving test run in their own production, the decision to use a sustainable VACUDEST vacuum distillation system for this site as well was made.

Branch: -

Type of sewage: -

In November 2013, AUDI AG opened its new production facilities in Münchsmünster. In the Industrial Park in Münchsmünster, located approximately 30 kilometres to the east of the main plant, an Audi competence centre was created for the production of bodywork structural parts made of die-cast aluminium, hot and cold formed pressed parts, as well as chassis components.

Branch: -

Type of sewage: -

Sustainable and economical production - this was also the wish of the company ZINKPOWER Coating Schopsdorf in Saxony-Anhalt. The company specialises in the powder coating of steel, hot-dip galvanised steel and aluminium components. The company opted for a VACUDEST vacuum distillation system for the water treatment process.

Branch: -

Type of sewage: -

As a family-owned company with a long tradition spanning more than seven decades, ecological responsibility is a fundamental component of the Harting Technology Group's actions. Thus, the course towards wastewater-free production with the VACUDEST process was set early on at the main plant in Espelkamp. This fundamental decision in favour of ecologically sensible action in combination with economic considerations was also already supported during the company's development in China.

Branch: Automobile

Type of sewage: Waste water from die casting process

Sea Link International, a Tier 2 manufacturer that specializes in the development of complex components for the automotive lighting industry opened in October 2016 its new die cast facility in Kunshan. Looking for a sustainable and economical solution for its wastewater Sea Link opted for an H2O vacuum distillation system. Operation Manager Elmir Beca was involved in this project from the beginning and its major booster. He talks about his experience in this interview.

Branch: Automobile

Type of sewage: Waste water from component cleaning

Satisfaction and a little pride - this is reflected in the faces of the VACUDEST operators of the automotive supplier HQM Induserv from Saxony.

Branch: Watch industry

Type of sewage: Wastewater from metal processing

Since 1951, it has been a passion for high-quality SWISS MADE products that has turned CAPSA into a constantly evolving company that has successfully applied its unrivalled know-how to the service of the watchmaking industry. With 200 employees, a plant with over 400 machines including automatic lathes, a CNC machining centre, rework and assembly machines, CAPSA offers its clients a wide range of products and a great potential for production. CAPSA’s modern, efficient quality management system guarantees full implementation of the instructions provided by its clientele.

Branch: Construction industry

Type of sewage: Waste water from manufacturing process

The SIKA France factory in Gournay-en-Bray, subsidiary of the Swiss group SIKA AG, mainly manufactures additives for concrete and sealing products. These products are used in the building sector. Their production generates liquid waste which, after treatment, can still exceed the authorised limits for waste in municipal plants. The main value involved was the COD (chemical oxygen demand).

Branch: Pharmaceutical industry

Type of sewage: Stainless steel pickling water

20 years of H2O – two decades worth of experience. Many years of experience, including from the customers who use our systems. How did things used to be? What has happened since? To find that out, we visited one of our oldest clients. Believe it or not, they have been running a VACUDEST system to treat their stainless steel pickling water for 28 years. 

Branch: -

Type of sewage: -

The Vendée Concept plant in La Roche-sur-Yon (85) manufactures systems for the food industry using specific technological processes. When manufacturing their machines from welded stainless steel, water is generated as a by-product: namely rinsing water from the pickling and passivation processes. Previously this wastewater has been treated on site using a physicochemical facility. Vendée Concept has now decided to use a sustainable vacuum evaporator from H2O.

Branch: Industrial manufacturing

Type of sewage: Waste water from component cleaning

Kompressorenbau Bannewitz GmbH (KBB) has decided that it will no longer have wastewater from its various processes collected by a waste management company. Instead, the Saxon company has opted to deploy a VACUDEST vacuum distillation system from H2O GmbH. The resulting annual savings amount to €40,000.

Branch: Industrial manufacturing

Type of sewage: Stainless steel pickling water and rinsing water from pretreatment

The more profitable a project, the greater the investment. But it’s not just high savings potentials which motivate businesses to invest in wastewater treatment. The responsibility to protect the environment is also playing a key role for an increasing number of industrial companies.

Branch: Automobile

Type of sewage: Wastewater from degreasing, pickling and phosphatizing

Brock Alloy Wheels GmbH is one of the leading manufacturers of alloy wheels and aluminium rims. The company opened a new subsidiary, Jajce Alloy Wheels, in Bosnia-Herzegovina at the start of 2017.

Branch: Industrial manufacturing

Type of sewage: Rinsing water from pickling, passivation and electropolishing

“If it works, work with it; if it doesn’t, change it!” This was the motto under which the French firm DBP Holding operated when it decided on a proven wastewater treatment system with VACUDEST technology for its new factory workshop. Following over 15 years of positive experience with two existing VACUDEST system installations, a new VACUDEST L 4500 is now processing acidic rinsing water used to condition stainless steel and titanium.

Branch: Writing instruments

Type of sewage: Waste water from electroplating

Montblanc is a company based in Hamburg, Germany, that is well-known for manufacturing handcrafted, high-quality writing instruments. All Montblanc writing instruments are characterised by their high-quality materials. Many individual components in the pens – such as the nibs, rings and clips – are made from precious metals or are coated with precious metals. An electroplating process is used to coat the components with these metals. This process results in wastewater that contains precious metals and that must be treated before it can be fed into the sewerage system.

Branch: Aviation

Type of sewage: Waste water from crack testing

Jet Aviation in Basel, Switzerland, is using a VACUDEST vacuum distillation system to efficiently and sustainably treat wastewater left over from refurbishing aircraft parts. This state-of-the-art system replaced outdated chemical/physical treatment at the company...

Branch: -

Type of sewage: Waste water from electroplating

Evaporation by VACUDEST vacuum distillation plants is a cost effective, proven alternative to
chemical-physical treatment of wastewater from rotogravure cylinder production processes, allowing zero discharge production facilities.

Well informed but still have questions?

Our experts have the answer.

Contact us now

Requests

You have questions on our VACUDEST systems?

Kindly contact us!

 

Your contact is:

Thomas Dotterweich
 Senior Sales Engineer

+49 7627 9239-306
thomasm.dotterweich@h2o-de.com

Service

You need consumables, spare parts or a maintenance date?

We will be pleased to assist you!

 

Your contact is:

Carles Fité
 Technical Customer Support

+49 7627 9239-888
carles.fite@h2o-de.com

Career

You want to be part of our team and create the wastewater-free future with us?

We will tell you how!

 

Your contact is:

Bettina Böhringer
Human Resources

+49 7627 9239-201
career@h2o-de.com