Icon Contact
Icon Contact

Specjaliści produkcji wolnej od ścieków.

25 years of H2O - today we are not only looking back on a quarter of a century of company history, but also on an exciting journey full of technological advances – of which we sometimes have to smile about ourselves. Our design manager Andreas Strübe has been with us almost since the beginning. Here he ponders about what design and production looked like 25 years ago, why we had our own stalactite cave and why Polaroids were so important to us.

A little quiz to start our journey through time! Guess:

How was the VACUDEST constructed back then?

  1. On a sheet of paper with a ruler and sharpened pencil
  2. Digitally - in 2D with many lines in up to 6 system views
  3. Digitally - in 3D with an all-round view - like today, only slightly simplified

Did you go for 1? Wrong... 25 years ago there were still some professions and companies that still drew on paper, but not at H2O.

You thought maybe 3? No... unfortunately not. We weren't that far ahead of our time. But thank you for giving us the credit!

2? That's right! Of course, also digital drawing in 2D presented exciting challenges. "There were so many overlapping lines in the flat view that it was difficult to see all the possible collision points. And we only knew whether there was room for all the pipework in the machine after the prototype had been built eventually," says Head of Design Andreas Strübe.

Polaroid photos, stalactite cave and order bell

Three all-round talents designed the systems back then - today there are nine. The VACUDEST went into series production only, once the prototypes had been built and all the necessary adjustments had been made. "Of course, the systems were much smaller back then, our largest system processed 400 litres per hour - today we process up to 5,000 litres per hour. That's why our production was also much smaller. Back then, two employees manufactured the systems. Byheart from the top of their heads!And sometimes with the help of Polaroid photos as manufacturing instructions." In comparison, today 14 people work in a LEAN production environment with state-of-the-art equipment.

And the stalactite cave? Andreas smiles. "We put every system through its paces before it leaves the company for the customer. That was the case back then, and it's still the case today. We have a separate room for this - the technical centre. Back then, this technical centre was not a metre-high experimental hall like today, but a makeshift wooden shed. Since it very quickly became too small for the growing company, the roof of this shed was used as an extension for the water tanks. And because things can go wrong during test runs and tanks at the top sometimes overflew, we affectionately called the wooden shed underneath it the "dripstone cave".

How an order is announced in the H2O: In the past with an order bell, today with the crowing of our charming order chicken.

The vision of a wastewater-free future is the DNA of H2O

Andreas has also fond memories of the good old days: "25 years ago, the work was entirely different: you had a broader approachof tasks, you designed, built, wired control cabinets, carried out test runs and commissioned on site. Today, you have to be much more specialised in your area in order to be able to handle the increasingly complex projects.

The H2O family was small and fine, the founding spirit was clearly noticeable. After 25 years, our H2O family has grown considerably. To over 130 employees worldwide right now. But our vision and our commitment to the environment remain unshakableen. H2O's DNA hasn't changed, we've just found more people who share it.


The biggest differences in design and manufacturing, back then and now:

Back then Today

Largest system: 400 litres per hour

Largest system: 5,000 litres per hour

Text-based control - improved calculator

Graphic touch control with targeted safety messages and remote access


Inaccurate error messages takea lot of time to resolve, service technicians had to write down error messages  on site Precise safety messages are transmitted digitally and resolved remotely in 8 out of 10 cases without a service technician having to make the journey.

Technical design in 2D drawings

3D - CAD design

A few technologies for improving distillate quality positioned outside of the system

Space-saving all-in-one box: Integrated technologies for the highest possible quality on the smallest possible footprint


3 all-round talents in system design,

2 Allrounders in production


9 experts in system design,

14 specialists in production


Electrical power was in short supply - dishwashers and coffee machines had to be unplugged during test runs of large systems. To be on the safe side, data were also backed up on the PCs.

Plenty of power at the site, also thanks to our own photovoltaic system on the roof of the production facility.

Order announcement with a loud order bell that could be heard throughout the company.

Order announcement with an informative and entertaining newsletter and the loud crowing of our rubber order chicken.



Dobrze poinformowany i nadal masz pytania?

Nasi eksperci znają odpowiedź.

Skontaktuj się teraz


Pytania dotyczące naszych systemów VACUDEST?

Porozmawiajcie z nami!


Osoba kontaktowa:

Henryk Koik
Area Sales Manager

+48 608 49 02 30


Potrzebują Państwo materiały eksploatacyjne, części zamienne lub terminu serwisowego?

Chętnie pomożemy!


Osoba kontaktowa:

Carles Fité
 Doradca klienta

+49 7627 9239-888


Chcesz stać się częścią naszego zespołu i kształtować z nami wolną od ścieków przyszłość?

Powiemy Ci, jak!


Osoba kontaktowa:

Bettina Böhringer
 Kontakt ds. personalnych

+49 7627 9239-201