Icon Contact
Contacto
Icon Contact
Aniversario

Los Expertos en Vertido Cero de Aguas Residuales.

Water-miscible cooling lubricants are indispensable when machining, cutting or forming of mostly metallic materials. The subsequent disposal is expensive, so that for most companies, treatment by vacuum evaporation quickly pays off.

Numerous machining processes are associated with very high disposal costs for the accumulating, used cooling lubricant emulsions. This is exactly where complete systems from H2O come into play and treat such wastewater safely and in only one process step with the help of VACUDEST vacuum evaporators. By using such a system, the annual volume of wastewater to be disposed of can be drastically reduced. By using our future-oriented technology, the volume of wastewater to be disposed of can be reduced by approx. 95 %. This also reduces your disposal costs by 95 %.

Sustainable wastewater treatment: Adhere to limit values and protect your wallet.

The use of VACUDEST systems is not only economical but also sustainable. The treated wastewater is so good that it can be reused in your production. Our complete systems always consider the entire process. In addition to the actual treatment of the versatile wastewater streams using vacuum evaporation, any necessary pre-treatment steps, such as the separation of chips and sludge, can also be integrated into the overall solution. In addition to these coarse impurities, used cooling lubricant emulsions from the machining processes usually contain emulsified, oily components. This is where our patented Clearcat technology gives you a decisive advantage.

Crystal clear and oil-free distillate. Oils and low-boiling components are reliably separated directly after condensation in the system. Oily residual contamination caused by co-distillation thus remains in the evaporation residue. The COD value (chemical oxygen demand) caused by mineral oils, a measure for the biological load of the water, is reduced by up to 98 %. This is an improvement of 60 % compared to single-stage distillation. In addition, the hydrocarbon index (oil index), which is caused by non-polar hydrocarbons, is lowered to < 10 mg/litre in a reliable process. A treatment with downstream technologies is often not necessary. The required limit values are safely observed and official controls no longer pose a problem.

In order to always provide our customers with the highest distillate quality, our Purecat stage was recently developed with regard to COD values. In addition to the already impressive results of the conventional Clearcat system, an even further reduction of organic components can be achieved here by means of a downstream steam wash.

Possible wastewater types:

  • Spent cooling lubricants
  • Industrial washing and cleaning water
  • Die Casting Emulsions
  • Floor mop wastewater

Your solution could look like this

A fairly simple solution usually includes a belt filter for pre-treatment, which separates coarse impurities such as metal chips. Various containers are used to collect the wastewater and to convey it from there to the VACUDEST. Your wastewater is then treated safely and efficiently.

Our innovative technologies within the VACUDEST are used to ensure that the distillate quality is always very good. Thanks to the Clearcat technology, the distillate is almost free of oil and the Destcontrol controller ensures a constantly good pH value. To prevent scaling we further use our so-called Activepowerclean whirl material.

Depending on your individual requirements, the distillate quality can be treated and further optimised by using downstream technologies such as activated carbon. In many cases, the distillate is circulated and thus reused in production. It is also possible to discharge the distillate into the sewer, as the distillate meets the quality requirements.

The solution shown here is designed for wastewater volumes of up to 2,100 m3 per year.

Do you have any questions about the wastewater treatment in your company? Contact our experts and get comprehensive advice.

Your benefits at a glance

  • Consulting & wastewater analysis by the H2O application centre
  • Individual solution for your process
  • Space-saving turnkey system
  • Low operating costs thanks to maximum energy efficiency
  • Low operating efforts thanks to fully automatic operation
  • User-friendly Vacutouch machine control (Ready for Industry 4.0)
  • Reliable compliance with internal and external limit values 

Descubra ahora :
Unidades de destilación VACUDEST

Las unidades de destilación VACUDEST son ideales para el tratamiento de aguas residuales industriales. Pueden utilizarse en una amplia gama de aplicaciones industriales y adaptarse a cualquier capacidad gracias a una gran variedad de tamaños.

Sus ventajas

  • Sistema completo con ahorro de espacio
  • Funcionamiento totalmente automático
  • Control Industria 4.0
  • Bajos costes de explotación
  • Máxima eficiencia energética
  • Conformidad con los valores límite
VACUDEST L
VACUDEST L
VACUDEST XL
VACUDEST XL
VACUDEST XXL
VACUDEST XXL
VACUDEST XS
VACUDEST XS
VACUDEST S
VACUDEST S
VACUDEST M
VACUDEST M

¿Está bien informado pero aún tiene preguntas?

Nuestros expertos tienen la respuesta.

Contáctenos ahora

Trabaja con nosotros

¿Quiere ser parte de nuestro equipo y ayudarnos a lograr un futuro libre de aguas residuales?

¡Nosotros le decimos como hacerlo!

 

Su contacto:

Bettina Böhringer
Personalreferentin

+49 7627 9239-201
career@h2o-de.com

Servicio

¿Necesita consumibles, piezas de recambio o una cita para mantenimiento?

¡Con gusto le ayudamos!

 

Su contacto:

Carles Fité
Responsable de asistencia técnica al cliente

+49 7627 9239-888
carles.fite@h2o-de.com 

Consultas

¿Tiene preguntas acerca de nuestro sistema VACUDEST?

¡Contáctenos!

 

Su contacto:

Thomas Dotterweich
Senior Sales Engineer

+49 7627 9239-306
thomasm.dotterweich@h2o-de.com